Description
The Ortofon 2M Bronze is a premium moving magnet cartridge built around a Nude Fine Line diamond stylus. The slim Fine Line profile traces very fine groove detail, especially at high frequencies, so you hear more of what is on your records.
Inside, a quad-coil generator with split pole pins and silver-plated OFC coil wire gives a 5 mV output, a standard moving magnet level that suits the MM phono input on most amplifiers and phono stages. The stylus pushes on and off, so when it wears you replace the stylus rather than the whole cartridge.
Good to know
- Compatible with most tonearms.
- Recommended tracking force 1.5 g (range 1.4 to 1.7 g).
- Connect to an MM phono input: recommended load 47 kOhm, 150 to 300 pF.
- Replacement stylus: the Ortofon Stylus 2M Bronze, also available from us.
- This is the standard 2M Bronze. The Verso and Premounted versions are different products.
- Free collection from our Ascot showroom, and we are happy to help with fitting and set-up.
Specifications
| Type | Moving magnet (MM) |
|---|---|
| Stylus | Nude Fine Line diamond, r/R 8/40 µm |
| Cantilever | Aluminium |
| Output voltage | 5 mV (1 kHz, 5 cm/sec) |
| Channel separation | 26 dB at 1 kHz, 15 dB at 15 kHz |
| Channel balance | 1 dB at 1 kHz |
| Frequency response | 20 Hz to 20 kHz, +2 / -0 dB |
| Frequency range | 20 Hz to 29 kHz (-3 dB) |
| Tracking force | 1.5 g recommended (1.4 to 1.7 g) |
| Compliance | 22 µm/mN |
| Tracking angle | 20° |
| Internal impedance | 1.2 kOhm |
| Recommended load | 47 kOhm, 150 to 300 pF |
| Weight | 7.2 g |
| Replacement stylus | Ortofon Stylus 2M Bronze |
Questions about the 2M Bronze, or whether it suits your turntable? Call us on 01344 511 612 or visit us in Ascot.



